The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Behavioral Models >> Verilo A model https://designers-guide.org/forum/YaBB.pl?num=1530621118 Message started by ouijdane on Jul 3rd, 2018, 5:31am |
Title: Verilo A model Post by ouijdane on Jul 3rd, 2018, 5:31am Hello, I want to write a verilog A code of a space state average model of a dc dc boost converter. Can anyone tell me the first step and howa should I proceed? Thank you in advance. |
Title: Re: Verilo A model Post by Geoffrey_Coram on Jul 5th, 2018, 12:24pm I don't know what a "state space average model" is. What do you want as your inputs and outputs of this model? Can you write equations for currents and voltages, or is a state-space models at a higher level? (in which case, Verilog-A might not be the right language) |
Title: Re: Verilo A model Post by Frank Wiedmann on Jul 6th, 2018, 9:00am If you want to learn about state space average models of dc/dc converters, the books by Christophe Basso (http://cbasso.pagesperso-orange.fr/Spice.htm) are probably a good starting point. If you want to learn Verilog-A, you can start right on this site at http://www.designers-guide.org/VerilogAMS/ |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |