The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> Wire in Verilog A https://designers-guide.org/forum/YaBB.pl?num=1537978676 Message started by Maverick_shastry on Sep 26th, 2018, 9:17am |
Title: Wire in Verilog A Post by Maverick_shastry on Sep 26th, 2018, 9:17am Hello, Is there a way to specify the wire assignments in Verilog A ? This is what I mean: wire A = reg_001[1]; wire B [2:0] =reg_002[3:1]; wire C =reg_003[4]; Regards Shastry |
Title: Re: Wire in Verilog A Post by Ken Kundert on Sep 26th, 2018, 12:52pm No. There are no digital wires in Verilog-A. All the wires are electrical. -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |