The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> Anyone know how to make a usable +/- 20V Dual Power Supply from DC https://designers-guide.org/forum/YaBB.pl?num=1540586960 Message started by z7d8tsg on Oct 26th, 2018, 1:49pm |
Title: Anyone know how to make a usable +/- 20V Dual Power Supply from DC Post by z7d8tsg on Oct 26th, 2018, 1:49pm Hi Everyone, I am trying to make this : https://www.edaboard.com/showthread...-and-Gnd)-to-1-Mhz-square-wave-(-20v-and-20v) Anyone know how I can make a +/- 20V Dual Power Supply to power the above link? I have a wall charger that makes 64V 360mA LPS that I can use to start things off Thanks -Dan |
Title: Re: Anyone know how to make a usable +/- 20V Dual Power Supply from DC Post by z7d8tsg on Oct 27th, 2018, 12:51pm Anyone have any recommendations for an (IGBT Driver and IGBT Combo) or (Mosfet Driver and Mosfet Combo) that could do this? I cannot find an ideal combo... Thanks |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |