The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Entry Tools >> FreePDK45 usage in Virtuoso https://designers-guide.org/forum/YaBB.pl?num=1593362688 Message started by blue111 on Jun 28th, 2020, 9:44am |
Title: FreePDK45 usage in Virtuoso Post by blue111 on Jun 28th, 2020, 9:44am I am using FreePDK45 in Virtuoso, but I faced the following error: Quote:
Following advices at https://www.edaboard.com/threads/cadence-virtuoso-and-mmsim-installation.305420/page-3 does not really help. Could anyone advise ? |
Title: Re: FreePDK45 usage in Virtuoso Post by Tako on Jul 2nd, 2020, 4:12am You should check paths in input.scs whether they point properly to your library where you names matches. |
Title: Re: FreePDK45 usage in Virtuoso Post by blue111 on Jul 2nd, 2020, 4:25am Problem solved. There is some typo mistake See https://community.cadence.com/cadence_technology_forums/f/custom-ic-design/45361/freepdk45-usage-in-virtuoso/1368256#1368256 |
Title: Re: FreePDK45 usage in Virtuoso Post by Tako on Jul 2nd, 2020, 4:44am Great. Thank you for the feedback. This one was one of the expected problems. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |