The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> Mixed-Signal Design >> Bypassing and Decouping Power Supplies
https://designers-guide.org/forum/YaBB.pl?num=1075485915

Message started by Ken Kundert on Jan 30^th, 2004, 10:05am

Title: Bypassing and Decouping Power Supplies
Post by Ken Kundert on Jan 30^th, 2004, 10:05am

For those of you who have downloaded Power Supply Noise Reduction in http://www.designers-guide.com/Design be aware that an error in equation (5) was found by David Haigh of Xyratex. Fixing the error changes the nature of the advice given in the paper. If you have a previous copy, please discard it and download the updated version.

Thanks,
-Ken