The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> High-Speed I/O Design >> eye diagrams in cadence https://designers-guide.org/forum/YaBB.pl?num=1082525008 Message started by tony on Apr 20th, 2004, 10:23pm |
Title: eye diagrams in cadence Post by tony on Apr 20th, 2004, 10:23pm hello how does one make eye diagrams in cadence ? spectre or spectre rf ? thanks |
Title: Re: eye diagrams in cadence Post by Frank Wiedmann on Apr 21st, 2004, 4:29am In version 5.0, there is an eyeDiagram function in the Waveform Calculator (in the Special Functions menu). See the Waveform Calculator User Guide for details. |
Title: Re: eye diagrams in cadence Post by jbdavid on Nov 2nd, 2004, 4:56pm You can also use verilog-A there is an eye_diagram_generator in rfExamples - or rfLib.. this works on a timer.. but if your recieve clock is from a locked pll with some jitter model, you might want one that resets based on a trigger signal. you might check bmslib (ships with IC5.033 and above) to if the clocked version made it in there.. this generates two signals.. a horizontal sweep and vertical signal and you use those to do plot the vertical vs the horizontal.. to see the eye diagram.. Of course if you are interested in ensuring a sufficient eye-opening, you might rather check that directly.. which requires a different verilog-A or AMS model. Jbd |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |