The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Modeling >> Semiconductor Devices >> Avalanche Photodiode model https://designers-guide.org/forum/YaBB.pl?num=1083339830 Message started by Vinit on Apr 30th, 2004, 8:43am |
Title: Avalanche Photodiode model Post by Vinit on Apr 30th, 2004, 8:43am Hello guys, I am designing an quenching circuit for Avalanche Photo Diode(APD). My problem is, if I want to try some circuit, I have to prototype it, which is too tedious some times. Is there any tool which models the behaviour of an APD. I understand that it is really dificult to model the avalanche effect of APD, but then I wonder how do the companies which manufactuer these circuits work. Any suggestions or advice is welcome. Thanks in advance. Regards, Vinit. |
Title: Re: Avalanche Photodiode model Post by sheldon on Dec 28th, 2004, 4:17pm Vinit, Could you provide more information on what you are trying to do? In past discussion with designers, they seem to separate the "optical" characteristics of the diode from the "electrical" characteristics. For example, correct modeling of the capacitance is critical because that effects the bandwidth of the Trans-Impedance Amplifier. However, the IC designers I have spoken with don't seem to care as much about the "optical" characteristics of the photo-diode. Are you actually trying to model the entire closed-loop system, for example, DVD head positioningg, in order to model the loop dynamics? Could you just use a table model to convert laser power into current? Best Regards, Sheldon |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |