The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> RF Measurements >> VCO output impedance measurement. https://designers-guide.org/forum/YaBB.pl?num=1083737470 Message started by wccheng on May 4th, 2004, 11:11pm |
Title: VCO output impedance measurement. Post by wccheng on May 4th, 2004, 11:11pm Dear all, Could I use the s-parameter machine to measure the VCO output impedance? As we provide the Vdd to the VCO, it will generate the frequency with the output power. If I use the s-parameter to measure the output impedance, is the result corret and will it destroy the s-parameter machine? Best Regards, Charles CHENG |
Title: Re: VCO output impedance measurement. Post by mobil on Aug 22nd, 2007, 6:15pm I think u can estimate the oscillate point by this method, but the final results should be read from spectre anaylzer to see whether it's oscillating |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |