The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> RF Simulators >> Spectre netlist -> Hspice netlist method https://designers-guide.org/forum/YaBB.pl?num=1086155516 Message started by wccheng on Jun 1st, 2004, 10:51pm |
Title: Spectre netlist -> Hspice netlist method Post by wccheng on Jun 1st, 2004, 10:51pm Dear all, I want to convert the spectre netlist to hspice netlist. How could I do it? Due to the license problem, I could not directly generate the hspice netlist directly. It could generate the spectre netlist instead. However, I need to have a hspice netlist. Therefore, is any method to convert the spectre netlist to hspice netlist? Thanks for your helping Best Regards, wccheng |
Title: Re: Spectre netlist -> Hspice netlist method Post by Andrew Beckett on Jun 2nd, 2004, 3:55am Write yourself a perl script? Spectre has fairly regular syntax, so it should be easy enough to write a script to convert 99% of the netlist to hspice format. I'm assuming that you have spectre, since you can netlist for spectre - is there a reason why you need to use hspice for simulation instead of spectre? Regards, Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |