The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> How to analyze mismatch effect https://designers-guide.org/forum/YaBB.pl?num=1088559717 Message started by Roger on Jun 29th, 2004, 6:41pm |
Title: How to analyze mismatch effect Post by Roger on Jun 29th, 2004, 6:41pm Hi all, Is there any good reference methodology to verify mismatch effect of any differential pair ? The verification includes: 1.Identifying the most mismatch sensitive differential pairs 2.Verifying the improvement after redesign I've checked some paper on IEEE. However, those are based on the Monte-Carlo simulation which is very time-consuming and difficult to verify the two items I listed. Thanks. Roger |
Title: Re: How to analyze mismatch effect Post by Frank Wiedmann on Jun 30th, 2004, 11:43pm Spectre 5.0 has a dcmatch analysis that seems to do exactly what you want without using Monte-Carlo simulation. For details see the Spectre Circuit Simulator User Guide. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |