The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Extract data problem due to sudden dead
https://designers-guide.org/forum/YaBB.pl?num=1089968656

Message started by georgejor on Jul 16^th, 2004, 2:04am

Title: Extract data problem due to sudden dead
Post by georgejor on Jul 16^th, 2004, 2:04am

Dear all,
I have a problem in extracting the simulation result. Please give me a
help!
Here is the situation.
1. The simulator is Cadence IC5.0

2. During a transient simulation, if i plot a net, the waveform will show
the signal AND a straight line connect from the original to terminal point.
(Please remind, the simulation still not finished)

3. NOW, my simulation sudden dead, it is due to accident reboot of UNIX!!!

4. The simulation cannot continue because i do not have to save all net.

5. When i load the simulation data, the stragiht line is STILL HERE!!!!

6. If i use printvs or ocnprint to sample the waveform, ALL data gotten is
the stragiht line.

Can anyone teach me how to extract the original data? or how to remove the
staright line?

Many thanks!!

Best Regards