The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> Background simulation of the Spectre
https://designers-guide.org/forum/YaBB.pl?num=1092019959

Message started by wccheng on Aug 8^th, 2004, 7:52pm

Title: Background simulation of the Spectre
Post by wccheng on Aug 8^th, 2004, 7:52pm

Dear all,

I am using the Spectre simulator to simulate the VCO. Now, I am using the Parametric Analysis function to simulate the tuning frequency range of the VCO (vary the Vctrl of the varactor). Actually, I want to simulate it in the background simulation. I have tried to run the script of the "runSimulation". It just run one times only and will not run the no. of the run I set in the Parametric Analysis.

Therefore, how could I run the Parametric Analysis in the background simulation?

Thanks

wccheng

Title: Re: Background simulation of the Spectre
Post by Andrew Beckett on Aug 19^th, 2004, 10:37am

Look at using the distributed simulation options in ADE.

Alternatively use the save OCEAN script from the Parametric Analysis tool, and then run the simulation as a batch simulation using OCEAN.

Probably you'll need to read the documentation to find more info on these...

Andrew.