The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> Getting X values intercepted at some Y value
https://designers-guide.org/forum/YaBB.pl?num=1092712258

Message started by wychien on Aug 16^th, 2004, 8:10pm

Title: Getting X values intercepted at some Y value
Post by wychien on Aug 16^th, 2004, 8:10pm

Dear all,
I have a problem extracting datas in the Waveform Window. I have got a waveform datas from 0 to 1uS, and I need all X values whose corresponding Y intercept at some value, like "0". I use the "Markers/Horizontal Markers" in the menu, set the "Marker locations" as "0", and then push the "Display Intercept Data" button above. The X values would be displayed in the pop-up Result Display Window. However, only the preceding datas would be displayed, like 0 to 20nS. But I need all X datas from 0 to 1us. Would you please tell me how I should do to get all datas I want?

WY :)
Best Regards,

Title: Re: Getting X values intercepted at some Y value
Post by Andrew Beckett on Aug 19^th, 2004, 10:31am

If I've understood you properly, you should be able to use the cross() function with 0 as the edge number. You'd want to write some SKILL (or an OCEAN script) to format the data how you want, but cross() will give you all the X values where a particular transition occurs.

Andrew.