The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> VHDL-AMS >> vhdl-ams (help) mail id https://designers-guide.org/forum/YaBB.pl?num=1098749793 Message started by Raj on Oct 25th, 2004, 5:16pm |
Title: vhdl-ams (help) mail id Post by Raj on Oct 25th, 2004, 5:16pm hi there,.. currently i am doing a project using vhdl-ams. my title is A vhdl-ams model of a CCD. Basically i have to design all the function in a ccd for example kodak kai 4020M ccd. i have a some lack of understanding in this field because i just started to learn vhdl. i have some questions and if u could help me pls post or mail me the solution to rastaguy_99@yahoo.com. they are: 1. how to represent one pixel using vhdl-ams 2. how to trigger a process to a analogue input. thanks you!!! regards, raj |
Title: Re: vhdl-ams (help) mail id Post by Paul on Oct 27th, 2004, 9:00am Hello Raj, 1) depends a lot on your level of abstraction and the kind of physical units you want to use. I would try to model the charge accumulated over time in the pixel, but it will be a little tricky (but feasible) to convert it to a voltage at the read-out. 2) use the operation analog_signal'above(threshold) Hope this helps Paul |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |