The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design Languages >> Verilog-AMS >> Algorithm to calculate SNR,SINAD from FFT https://designers-guide.org/forum/YaBB.pl?num=1100555735 Message started by vivekrc on Nov 15th, 2004, 1:55pm |
Title: Algorithm to calculate SNR,SINAD from FFT Post by vivekrc on Nov 15th, 2004, 1:55pm Hi, In Verilog AMS, I have written an ideal four bit ADC code . The bits and the analog signal value are written to a file(4bitideal.dat) .I am calling this 4bitideal.dat file in Matlab. I am interested in an algorithm which calculates the Signal to noise ratio, Signal to noise plus distortion , spurious free dynamic range, total harmonic distortion from an FFT plot. FFT plot of a sine wave was obtained by reading the data from a file computed by Verilog AMS in Matlab. Thanks Vivek |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |