The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
General >> Opportunities >> Need RF Test Engineer
https://designers-guide.org/forum/YaBB.pl?num=1102012522

Message started by hschen on Dec 2^nd, 2004, 10:35am

Title: Need RF Test Engineer
Post by hschen on Dec 2^nd, 2004, 10:35am

I have an urgent need for a Sr. RF test engineer whom will report to me directly. The position is located in Tempe, Arizona. The candidate should have RF background, experienced in RF measurement instruments and automated test equipment (ATE). We build LDMOS and GaAs based RF power amplifiers ranging from 100mw to over 100W. Our division is the No. 1 RFPA semiconductor supplier to the global cellular infrastructure market. Ideal candidate will possess ATE programming and automated handler experience. The engineer should be familiar with RF test technologies - Power out, Gain, Eff, S parameters and distortion measurements (Imod, ACPR, Phase linearity, Gain flatness, EVM, etc). Mechanical expertise in test fixture and handler interface is a plus.