The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Other Measurements >> HOW TO TEST CHIP IN HIGH AND LOW TEMPERATURE? https://designers-guide.org/forum/YaBB.pl?num=1103703713 Message started by ywguo on Dec 22nd, 2004, 12:21am |
Title: HOW TO TEST CHIP IN HIGH AND LOW TEMPERATURE? Post by ywguo on Dec 22nd, 2004, 12:21am Hi, I wanna know how to test chip in high and low temperature. I am doing measurement in lab. Thanks Yawei |
Title: Re: HOW TO TEST CHIP IN HIGH AND LOW TEMPERATURE? Post by vivkr on Dec 6th, 2005, 2:31am Hi Yawei, In principle, you need a temperature chamber if you want uniform control over the testing. There are several. We have one from Siemens. But if you want to do it quick and dirty, then you can use a hair-dryer to get the high-temperature end, while for low-temperature, there are these cans of coolant (aerosol-like). Unfortunately, I don't know what these are called. Perhaps someone can suggest. Regards Vivek |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |