The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> spectre circuit simulator
https://designers-guide.org/forum/YaBB.pl?num=1109451125

Message started by ramus12 on Feb 26^th, 2005, 12:52pm

Title: spectre circuit simulator
Post by ramus12 on Feb 26^th, 2005, 12:52pm

Hello all!

What is the best way to specify inputs for simulation of a 64 bit adder using Spectre circuit simulator?

thanks!
Ramus

Title: Re: spectre circuit simulator
Post by kamesh419 on Mar 1^st, 2005, 7:45am

ramus12 wrote on Feb 26^th, 2005, 12:52pm:

What is the best way to specify inputs for simulation of a 64 bit adder using Spectre circuit simulator?

First try to make a file in ASCII with digital inputs for A, B and Cin individually. Then you can convert that file into voltage sources (Time-Value pairs) using any scripting language. Then you can use 'vpwlf' source in cadence to read directly from a file that you have created. This according to me is the simplest way. probably some body else can throw some more light on this.

Bye
kamesh.