The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> The problem in PDRACULA
https://designers-guide.org/forum/YaBB.pl?num=1112039481

Message started by Aigneryu on Feb 7^th, 2004, 6:24pm

Title: The problem in PDRACULA
Post by Aigneryu on Feb 7^th, 2004, 6:24pm

Maybe more and more people begin to use Mentor calibre
to perform design verification, but recently I have to use PDRACULA to complete the DRC, LVS, and LPE because the
technology does not support the use of calibre or assura.

I found some documents about the usage of PDRACULA on Internet, and I can complete the LPE with the output of a parasitic netlist by off-line method. However, I do not know how to import this parasitic information to cadence vituoso environment to make extracted cell view.

Even though I can use netlist directly to perform hspice/spectre simulation, I prefer using GUI and hierarchy editor to do so.

Can anybody give me a link to some material about the solution of my problem?

Title: Re: The problem in PDRACULA
Post by okguy on Feb 8^th, 2004, 7:45am

The best training I've ever seen is from CIC-taiwan.
But I could find it on their web site. I will check my CDs.

OkGuy?

Title: Re: The problem in PDRACULA
Post by okguy on Feb 9^th, 2004, 5:19am

I found it, if you need it .... post me. ;)

Title: Re: The problem in PDRACULA
Post by ywguo on Feb 29^th, 2004, 2:39am

Hello, okgur,

Could you send me a copy of the training on PDRACULA to me. It would be helpful.

Thanks!

Yawei Guo

My email is y_w_guo@yahoo.com

Title: Re: The problem in PDRACULA
Post by Andrew Beckett on Mar 4^th, 2004, 9:17am

You could of course read the DRACULA user guide that
comes with the software...

Andrew.

Title: Re: The problem in PDRACULA
Post by staric on May 23^rd, 2004, 4:29am

Why you need to import this parasitic information to cadence vituoso after LPE?