The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> Diva extract can't extract symbol pin https://designers-guide.org/forum/YaBB.pl?num=1112039564 Message started by CDR on Mar 20th, 2005, 1:44pm |
Title: Diva extract can't extract symbol pin Post by CDR on Mar 20th, 2005, 1:44pm Dear all Did anybody can't extract terminal using diva extract? The termnial is with pin type metal1.The warning message is:The terminal is symbol pin. WARNING: Terminal vdd! in the layout is not present in the extracted view. WARNING: Terminal vin in the layout is not present in the extracted view. But when I change the pin type to metal2 instead of metal1, the pin can be extracted. Is that because of the extraction rule or something else?I use ic5033 linux version.I could change all the pin type to metal2 or metal3.But there are a lot of pins for me to deal with. Thanks for any input |
Title: Re: Diva extract can't extract symbol pin Post by CDR on Mar 20th, 2005, 1:48pm Sorry, the sentence with "The terminal is symbol pin" after the warning message is what I try to tell you the information of pin type,not appeared in the warning message in cadence. |
Title: Re: Diva extract can't extract symbol pin Post by Andrew Beckett on Mar 20th, 2005, 11:10pm My guess is that your extract rules are not extracting terminals on metal1. A bit odd, but that's what it looks like. Without seeing the rules, it's hard to be sure. Andrew. |
Title: Re: Diva extract can't extract symbol pin Post by Robert on Jun 9th, 2005, 11:31pm hi, usually,in a diva drc rule file, only the conductive layers would be used as the pin, others wouled be exclusive, in my experience, metlas, polys,wouled works,but dualgates ,texts would prompt the warnings. i think it's your rule file exclude the meta1, it's really wield, check your file carefully. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |