The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> System Simulators >> Behavioural Modelling of ADC https://designers-guide.org/forum/YaBB.pl?num=1112039832 Message started by Leyman on Feb 24th, 2005, 6:25pm |
Title: Behavioural Modelling of ADC Post by Leyman on Feb 24th, 2005, 6:25pm Hi everyone, I want to learn the behavioural modelling for ADC (pipelined,SAR,flash,delta-sigma) including their non-ideal effects using Simulink. Does anyone knows any good article and notes that discuss about this topic? Then from the behavioural simulation results i.e. DC and AC performance, how do we set the requirements for each individual block of ADCs? Please someone consult me on this! Cheers |
Title: Re: Behavioural Modelling of ADC Post by gsuarez on Mar 26th, 2005, 7:17am Did you checked the Matlab exchange web page? There are some toolboxes for behavioral modeling of ADCs. You can start by looking those toolboxes, so you can start with your models. They have a few papers too. If you have a membership go to http://ieeexplore.ieee.org and there you will find all the articles you need. I'm working on behavioral modeling of sigma delta modulators. If you don't have access to the ieeexplore database then use google and you will find some papers. George |
Title: Re: Behavioural Modelling of ADC Post by sheldon on Mar 26th, 2005, 6:15pm Leyman, One other option is to simply Google on the topic of behavioral modeling ADCs. In general this works pretty well also. Sheldon |
Title: Re: Behavioural Modelling of ADC Post by sheldon on Mar 31st, 2005, 8:14pm Leyman, Here are some papers that are available on the net that you might find interesting: 1) BEHAVIORAL MODELING AND SIMULATIONS OF DATA CONVERTERS Discussing implementing Data Converter models in MATLAB and there are some additional papers reference in the Bibliography 2) There are also set of presentations discussing Pipeline ADC Design and presenting many of the important equations required for correct modeling. Pipeline Analogue-to-Digital Converters in particular, presentation #3 Systematic Design for Optimization contains a lot of useful information to help with searching the author is Joćo Vital 3) If you have access to IEEE papers then the following paper, provides a good overview of the key effects to model by circuit architecture Influence of the Architecture on ADC Error Modeling In general, the issue is not implementing a model in a tool. You can implement a model in any number of tools Matlab, Verilog-AMS, VHDL-AMS, VHDL, Quick Basic. The challenge is deriving the relationships between block performace and system level performance. Good Luck, Sheldon |
Title: Re: Behavioural Modelling of ADC Post by kuo on May 26th, 2005, 11:46am Mathwork web site has a 3bit pipeline ADC model. |
Title: Re: Behavioural Modelling of ADC Post by xuel on Jul 29th, 2005, 6:40pm kuo wrote on May 26th, 2005, 11:46am:
there are some problems in the 3bit pipeline ADC simulink model. Anyway, it may help on how to build simulink model for pipeline ADC |
Title: Re: Behavioural Modelling of ADC Post by jackchu on Oct 2nd, 2006, 8:04am http://www.mathworks.com/matlabcentral/fileexchange/loadFileList.do |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |