The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> operating point incremental capacitanc for Spectre
https://designers-guide.org/forum/YaBB.pl?num=1115191205

Message started by sutapanaki on May 4^th, 2005, 12:20am

Title: operating point incremental capacitanc for Spectre
Post by sutapanaki on May 4^th, 2005, 12:20am

Hi,

For the BSIM3v3 models, what names does Spectre use to display the incremental terminal capacitances of the MOS transistors? I need to know how it names Cgs, Cgd, Cdb, Csb. Does it also have a specific name for the total capacitance connected to the gate terminal and to the drain terminal?
Thank you in advance.

Title: Re: operating point incremental capacitanc for Spe
Post by Andrew Beckett on May 4^th, 2005, 8:29am

See http://www.designers-guide.org/Forum/?board=circuit;action=display;num=1112723856;start=3#3

Ken, perhaps it's time for an FAQ section?

Andrew.

Title: Re: operating point incremental capacitanc for Spe
Post by Ken Kundert on May 4^th, 2005, 9:46am

I've been thinking the same thing. I hope to have something in the next few months.

-Ken