The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design Languages >> Verilog-AMS >> how to model a charge pump
https://designers-guide.org/forum/YaBB.pl?num=1125217773

Message started by analogcn on Aug 28^th, 2005, 1:29am

Title: how to model a charge pump
Post by analogcn on Aug 28^th, 2005, 1:29am

Hello everybody,
i am a beginner of verilog AMS language, and want to model a charge pump
thank you for your help!

Title: Re: how to model a charge pump
Post by svensl on Aug 28^th, 2005, 1:39am

If you have a look at the Verilog AMS section on this site, you will find examples of a charge pump. Have a look at the PLL models which contain CPs.

Title: Re: how to model a charge pump
Post by sheldon on Aug 28^th, 2005, 5:12am

Analogcn,

Do you mean a Charge Pump used in a PLL or do you
mean a Charge Pump for dc-to-dc conversion?

Best Regards,

Sheldon

Title: Re: how to model a charge pump
Post by analogcn on Sep 13^th, 2005, 5:37pm

Hello Sheldon,
I wanna model a Charge Pump for DC-DC converter to double voltage. Would you give me an example? Thanks!

analogcn