The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Physical Verification, Extraction and Analysis >> CWS (substrate noise analysis)
https://designers-guide.org/forum/YaBB.pl?num=1127420019

Message started by horizon on Sep 22^nd, 2005, 1:13pm

Title: CWS (substrate noise analysis)
Post by horizon on Sep 22^nd, 2005, 1:13pm

Hello,
I would like to know if somebody tested the CWS tools.
This one is a new tools to extract and quantify the substrate noise.
Thank you very much
have a nice day
Horizon

Title: Re: CWS (substrate noise analysis)
Post by Andrew Beckett on Sep 24^th, 2005, 3:23am

Do you have a URL for the supplier of these tools? I did some google searching and couldn't find anything relevant (most seemed to be related to Constructed Wetlands - which is obviously nothing to do with this!).

I'm interested...

Andrew.

Title: Re: CWS (substrate noise analysis)
Post by horizon on Jan 28^th, 2006, 3:29pm

Hi Andrew,
I am sorry for this late answer...
CWS means coupling wave solution.
I don't have URL , but if you write "cws" and "voiron" you will find article about it
Horizon

Title: Re: CWS (substrate noise analysis)
Post by Paul on Jan 29^th, 2006, 1:10pm

Hi Andrew, hi Horizon,

I only found a couple of short links in French, as the company is based in the Grenoble area. I believe this is a new start-up company co-founded by François Clement, who contributed to the developement of Substrate Storm at Simplex (which was later aquired by Cadence, I believe). I don't think they have any tools available yet, I couldn't even find a web site :(

Paul