The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> AMS Simulators >> Data export problem
https://designers-guide.org/forum/YaBB.pl?num=1131496103

Message started by KiYoung on Nov 8^th, 2005, 4:28pm

Title: Data export problem
Post by KiYoung on Nov 8^th, 2005, 4:28pm

I have problems with getting data in text file format
from the AMS simulation results.

Simvision does NOT have "print" option as in calculator.
I searched all over the pull-down menus and also manuals,
but couldn't find it.

Also, it seems DirectPlot of AMS menu does not work
for current. Even if I select a terminal, Simvision waveform
viewer displays nothing, although voltages are displayed well.
Am I supposed to set something up before simulation?

Lots of thanks in advance,
KiYoung

Title: Re: Data export problem
Post by KiYoung on Nov 8^th, 2005, 5:20pm

Sorry, folks.
It was under File->Export.... in Simvison.
But, current probing is still not functional.

KiYoung