The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Mixed-Signal Design >> Unit gaun Buffer ( with different Commom mode) https://designers-guide.org/forum/YaBB.pl?num=1137594946 Message started by mitchell on Jan 18th, 2006, 6:45am |
Title: Unit gaun Buffer ( with different Commom mode) Post by mitchell on Jan 18th, 2006, 6:45am Dear All: Now I design a unitgain buffer , The input common mode is Vdd/2 ,(vdd=2.5) , But the output common mode is fixed 0.5v,it indepant with VDD , Vdd has 5% variation . And the Buffer's SFDR must large than 65dBc . I using source follower to do this project , becasue source follower is open loop structure , It's poor SFDR , I hace done 57~60 vary with VDD , Does any have good idea or command to improve the SFDR ? Thanks . This is very urgent for me , Thanks |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |