The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> Problems to start LVS in assura3.1.4
https://designers-guide.org/forum/YaBB.pl?num=1141220191

Message started by cyrus on Mar 1^st, 2006, 5:36am

Title: Problems to start LVS in assura3.1.4
Post by cyrus on Mar 1^st, 2006, 5:36am

Hello together,

I have the following problem during the LVS check. When I start the LVS I get the following
the message that the LVS failed. The problem is described as follows: Segementation violation
Did someone has this problem ? Is this a bug? Because with assura 3.1.2 the LVS runs.

Greetz

Title: Re: Problems to start LVS in assura3.1.4
Post by Paul on Mar 1^st, 2006, 12:50pm

Cyrus,

you mentioned Assura 3.1.2, but what version are you currently using? What Cadence version are you using, what is your OS (type and release)?
Did you check Sourcelink for possible solved problems?

Paul

Title: Re: Problems to start LVS in assura3.1.4
Post by cyrus on Mar 2^nd, 2006, 8:58am

As mentioned in the top line I used assura 3.1.4 that did not run!
The software is installed on a solaris workstation SunOS 5.8. Cadence version is 5.1.41