The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Physical Verification, Extraction and Analysis >> Re: Assura within icfb https://designers-guide.org/forum/YaBB.pl?num=1145571275 Message started by Andrew Beckett on Apr 22nd, 2006, 4:13am |
Title: Re: Assura within icfb Post by Andrew Beckett on Apr 22nd, 2006, 4:13am Which license is it complaining about? What exactly is the error message? Andrew. |
Title: Re: Assura within icfb Post by FastFurious on Apr 22nd, 2006, 1:34pm Hello Andrew, Thanks for replying. I get differen things when I ran assura from inside virtuoso or outside using avview. Inside virtuoso I select the rule file, but it complains about the assura_tech.lib that is non existent. Using avview, the error is saying that there are errors in assura_drc.rul file and it says can not open assura_drc_memory.rul (seemingly another file called within the assura_drc.rul) Can you please help. Thanks. |
Title: Re: Assura within icfb Post by FastFurious on Apr 22nd, 2006, 2:15pm Hello Andrew, I have been debugging this problem and it seems it was a path issue. However, now I narrowed it down to a problem about one error: Illegal Modifier 'withIntersection" and it says errors exist in the rule file. failed to build VDB. Cannot submit DRC Run! I opened the rule file and indeed there is a line withe his withIntersection command. I am puzzled as this drc file comes from the foundry and it should not complain. I appreciate your valuable help. Regards |
Title: Re: Assura within icfb Post by unipr on Sep 11th, 2006, 8:25am I have the same problem; even deleting the Illegal Modifier 'withIntersection" parts, it complains that it can not open assura_drc_memory.rul , even if the file is there and is fully shared (chmode a+rwx) Is there any solution? |
Title: Re: Assura within icfb Post by Andrew Beckett on Sep 12th, 2006, 1:44pm My guess is that probably you're not using a recent enough Assura version? I've not had a chance to look up the error message to see if it is known. Andrew. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |