The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl General >> Opportunities >> RF IC Designer/Architect Needed https://designers-guide.org/forum/YaBB.pl?num=1156545199 Message started by Bamboo Sticks on Aug 25th, 2006, 3:33pm |
Title: RF IC Designer/Architect Needed Post by Bamboo Sticks on Aug 25th, 2006, 3:33pm Exciting start-up business opportunity calls for senior RF IC design talent(s) to lead product and technology development. Initial products are in the RF tuner/transmitter areas. If you have the right experiences, this could be a path to the CTO position. This is an entrepreneurial oppotunity with great business potential and rewards. Responsibilities include: 1. RF tuner chip architecture; 2. Design and layout of high-performance, high-yield analog/mixed signal circuits such as LNA's, mixers, PLL (integer/fractional-N), VCO's, VGA's, PA's, I/Q modulators/demodulators, voltage regulators, filters, and data converters. 3. Help develop product test plans. Qualifications: 1. Solid industry experience in developing RF IC products, especially in the RF tuner area; 2. Experience and familiarity with various analog & digital TV & radio broadcast standards (terrestrial, cable, satellite, etc.) 3. Excellent analytical and problem solving skills, including experience in system-level debugging. Highly desirable: 1. Knowledge and experience in low power RF design techniques and/or yield enhancing techniques; 2. Knowledge and experience in DSP algorithms from a system trade-off perspective; 3. Willingness for occasional, short-duration business travels to Asia; 4. Leadership skills. Please email ss25sc@yahoo.com for further details. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |