The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Logic Simulators >> Marching Plot using Wavescan with sst2
https://designers-guide.org/forum/YaBB.pl?num=1162829929

Message started by pancho_hideboo on Nov 6^th, 2006, 8:18am

Title: Marching Plot using Wavescan with sst2
Post by pancho_hideboo on Nov 6^th, 2006, 8:18am

Hi.

I can do marching plot with Simvision Waveform Viewer in Incisive Unified Simulator.
Wavescan in Cadence's ADE can handle sst2 data, but I can't do marching plot using this.

Can't Wavesan do marching plot ?

Title: Re: Marching Plot using Wavescan with sst2
Post by ACWWong on Nov 6^th, 2006, 9:01am

no wavescan doesn;t do marching ...
see the related topic:
http://www.designers-guide.org/Forum/YaBB.pl?num=1155897665/12#12

Title: Re: Marching Plot using Wavescan with sst2
Post by pancho_hideboo on Nov 7^th, 2006, 10:12am

Hi.

Thanks for response.

I read thread you refer.
But still I can't do marching plot using wavescan with sst2 data from NC-Sim.

On the other hand, it's possible to do marching plot using simvision with sst2 data from NC-Sim.