The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> AMS Simulators >> Nodeset for internal nodes in spectre https://designers-guide.org/forum/YaBB.pl?num=1166105479 Message started by biffovic on Dec 14th, 2006, 6:11am |
Title: Nodeset for internal nodes in spectre Post by biffovic on Dec 14th, 2006, 6:11am HI! I was trying to set initial guesses for a VerilogA modul in spectre. The manual said nodeset Voff=0 X3.7=2.5 M1:int_d=3.5 L1:1=1u where M1 is the name of a transistor and int_d is the internal drain node. However, this did work. Spectre warned me that it couldn't find this node. Does anyone know how to set node voltages for internal nodes of devices, models or compiled models (cmi)? Thanks a lot! Chris |
Title: Re: Nodeset for internal nodes in spectre Post by Ken Kundert on Dec 14th, 2006, 8:06am That should work. Are you sure M1 has an internal drain? -Ken |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |