The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Modeling >> Passive Devices >> Spectre wire model for cadence usage
https://designers-guide.org/forum/YaBB.pl?num=1167295562

Message started by Omer Heymann on Dec 28^th, 2006, 12:46am

Title: Spectre wire model for cadence usage
Post by Omer Heymann on Dec 28^th, 2006, 12:46am

Hello,

Trying to build a wire model.

I have the scs netlist for the wire model.

Now that I have the netlist how to I integrate this into cadence schematics (and get the netlister to recognize it)?

Do I need to build a symbol for the wire model and add simulation CDF parameters? Do I need to create some how a spectre view for this wire_model? (how ..)

Any help is greatly appreciated.

Regards Omer.

Title: Re: Spectre wire model for cadence usage
Post by martinm_de on Jun 20^th, 2014, 12:23am

Just create a symbol, and copy the symbol to "spectre" view.

Edit CDF parameters, "cdf layer" = "base" , and edit the
"simulation information" tab, "spectre" and finally "termOrder"

Enter the name of the pins which appear in the symbol
in the same order as they appear in the netlist you have created

Enter them in double quotes, e.g.

"ain" "dout" "vdd"