The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Measurements >> RF Measurements >> Anybody can share me documents ?
https://designers-guide.org/forum/YaBB.pl?num=1174721682

Message started by john_li on Mar 24^th, 2007, 12:34am

Title: Anybody can share me documents ?
Post by john_li on Mar 24^th, 2007, 12:34am

Hi all,
I am a beginner,Can anyone kindly share me the document about RF measure?
Thank you in advance,

Title: Re: Anybody can share me documents ?
Post by jtbarr4 on Mar 24^th, 2007, 9:30am

This is a very broad question and without more information on the specific need very difficult to provide an useful answer.

The various providers of RF test & measurement (T&M) equipment (Agilent, Anristu, Rhode & Schwartz, National Instruments, ...) all have very extensive application note libraries.

There are more general web sites (I sure others have other favorites)
http://www.rfcafe.com
http://www.microwaves101.com
http://www.rfglobalnet.com/forums/
.....

The IEEE has many publications and conferences http://ieeexplore.ieee.org/Xplore/dynhome.jsp
and societies that focus on RF measurements
http://ewh.ieee.org/soc/im/imnew/
http://www.mtt.org

and much, much more

perhaps you could describe the the type of measurement or problem you are having?

Title: Re: Anybody can share me documents ?
Post by john_li on Mar 24^th, 2007, 11:49pm

I really need the amplifier,mixer and oscilator design figure measure and device setup.

Title: Re: Anybody can share me documents ?
Post by jtbarr4 on Mar 25^th, 2007, 11:41am

Not only is the device type a factor but the
desired set of measurements,
frequencies and power levels, and
Device-Under-Test (DUT) configuration (on-wafer, die, package style, ....).

I would suggest one of the commercial T&M companies (I work for one of them, Agilent) web sites and look over their application note library. There are numerous examples provided in the app notes.

There are also a number of good books on RF device measurements to be found at Artech, Willey, ... publishers.

This is really a very broad area and there is no single answer.