The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Measurements >> Other Measurements >> PLL transfer function
https://designers-guide.org/forum/YaBB.pl?num=1181986704

Message started by sivacharan on Jun 16^th, 2007, 2:38am

Title: PLL transfer function
Post by sivacharan on Jun 16^th, 2007, 2:38am

Hi
Can anyone explain how we can plot PLL transfer function(Output phase/ Input phase) using spectre and spectreRF?
If there are any documents pls share.

Thanks,
siva.

Title: Re: PLL transfer function
Post by Jess Chen on Jul 3^rd, 2007, 8:48am

The answer depends on how you plan to model the PLL. If you are using a phase domain model, you can generate and plot the transfer functions with Spectre. If you are using a voltage domain model, you may want to try SpectreRF of some other RF simulator. You could also try to simulate an impulse response and then take the Fourier transform to get the transfer function but that would be very tricky.

How do you plan to model the PLL?