The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Other CAD Tools >> Entry Tools >> Need program to extract schematics from a netlist https://designers-guide.org/forum/YaBB.pl?num=1185274266 Message started by Unique on Jul 24th, 2007, 3:51am |
Title: Need program to extract schematics from a netlist Post by Unique on Jul 24th, 2007, 3:51am Hello to everyone! Could You advise me some programs which extract schematics from the netlist? Best regards, Dina |
Title: Re: Need program to extract schematics from a netl Post by topquark on Jul 25th, 2007, 10:38am Hey Dina Try EDIF's N2S converter - www.softjin.com/img/n2s.pdf I haven't used it myself but have heard it does a good job with most netlist in HSPICE or spectre format. |
Title: Re: Need program to extract schematics from a netl Post by Unique on Jul 29th, 2007, 11:15pm Thanks a lot! I'll try it |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |