The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Analog Design >> Sigma Delta output spectrum https://designers-guide.org/forum/YaBB.pl?num=1195169046 Message started by Sarig on Nov 15th, 2007, 3:24pm |
Title: Sigma Delta output spectrum Post by Sarig on Nov 15th, 2007, 3:24pm Hello, I fail to understand. why when looking at Sigma Delta output spectrum I see that the noise reach ~-40dB at its maximum. how do I calculate this maximum ? why it is not 10log(1/12fs) ? Thanks, Erez |
Title: Re: Sigma Delta output spectrum Post by sheldon on Feb 19th, 2008, 7:06pm Erez, The most likely explanation is that numerical noise is being introduced during the conversion from time to frequency. You can see the following link for some hints about how to effectively simulate Sigma-Delta converters. http://www.designers-guide.org/Forum/YaBB.pl?num=1143013397 Best Regards, Sheldon |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |