The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> CDF parameters are not recogniszed by verilog cell
https://designers-guide.org/forum/YaBB.pl?num=1198148349

Message started by rajdeep on Dec 20^th, 2007, 2:59am

Title: CDF parameters are not recogniszed by verilog cell
Post by rajdeep on Dec 20^th, 2007, 2:59am

Hi all,

After I add CDF parameters for verilog cells, the parameters are visible when I press 'q' on any instance
of the cell. But during netlisting it is ignoring those parameters, and hence the simulation result is also not what I'm
expecting.

Can anyone tell me how to get rid of this problem?

Rajdeep

Title: Re: CDF parameters are not recogniszed by verilog
Post by rajdeep on Dec 24^th, 2007, 4:31am

Well, this problem is solved. This site was useful. http://www.ece.uci.edu/eceware/cadence/compveruser/chap9.html#1016249

One has to add a property named hnlVerilogCDFdefparamList by using the SKILL function dbCreateProp.

Thanks,
Rajdeep