The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> save monte carlo mismatch params to file
https://designers-guide.org/forum/YaBB.pl?num=1203667793

Message started by trond on Feb 22^nd, 2008, 12:09am

Title: save monte carlo mismatch params to file
Post by trond on Feb 22^nd, 2008, 12:09am

Hello,
i was wondering how i can save the mismatch parameters from a monte carlo simulation to a file. I read the solution number 11418896 "how to get param files for monte carlo mismatch variations" which essentially tells me to include the following into the netlist:

savemismatchparams=yes mismatchparamfile="..." mismatchscalarfile=""

However, when running spectre tells me that savemismatchparams is not a valid parameter for and instance of montecarlo.

Any help is appreciated.
Thanks.

BTW, I am using icfb version 5.1.0 11/07/06 and spectre 6.1.0 10/10/06

Title: Re: save monte carlo mismatch params to file
Post by Frank Wiedmann on Feb 22^nd, 2008, 12:51am

Well, the solution mentions MMSIM 6.2ISR, so I guess that you need a very recent version of Spectre.

Title: Re: save monte carlo mismatch params to file
Post by trond on Feb 22^nd, 2008, 1:13am

You are right, only saw 5.1.xx/6.xx and thought I was all right. Anyways, is there another way to save the mismatch params?

............................
.................
.........
...
After talking to my IT people I was told that we do have MMSIM 6.2. With this version it works like a charm.