The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Spectre doesn't save all signals https://designers-guide.org/forum/YaBB.pl?num=1205349865 Message started by M.C. on Mar 12th, 2008, 12:24pm |
Title: Spectre doesn't save all signals Post by M.C. on Mar 12th, 2008, 12:24pm Hi, I'm simulating a flash ADC, and would like to view the outputs of the different comparators. However, when I have more than a certain number of blocks, the simulation doesn't save all the signals, even though I specify "save all." Has anyone faced this before when using Cadence? Thanks. |
Title: Re: Spectre doesn't save all signals Post by haikom on May 3rd, 2008, 1:39pm Hi, try to increase the subcircuit probe level in the ouput options. Regards, hqqh |
Title: Re: Spectre doesn't save all signals Post by navywhj on Jun 3rd, 2008, 3:21am sorry,i do not meet the thing,you can rerun again |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |