The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Design >> High-Speed I/O Design >> need bsim3v3.3 model card
https://designers-guide.org/forum/YaBB.pl?num=1206983749

Message started by akki on Mar 31^st, 2008, 10:15am

Title: need bsim3v3.3 model card
Post by akki on Mar 31^st, 2008, 10:15am

hi,
I am designing a cml buufer working at frequency around 10 gbps, till now I've done simulation with bsim3v3.1(0.18um) in spectre , now i want to use bsim3v3.2(0.18um) which is extended rf model for more accurate result.

Unfortunately i am unable to find model card for the same on mosis and bsim site also.

i would really be grateful if someone can provide me d model file.

thanks .
-akki

Title: Re: need bsim3v3.3 model card
Post by ywguo on Apr 6^th, 2008, 5:48am

Hi akki,

You'd better ask the guy who have provided the process and model to you ever before, i.e., the foundry or MOSIS.

Yawei

Title: Re: need bsim3v3.3 model card
Post by loose-electron on Apr 17^th, 2008, 3:56pm

Get this from the PDK associated with the foundry that you are designing for. This will be very specific to the foundry.

Title: Re: need bsim3v3.3 model card
Post by jbdavid on Jun 19^th, 2008, 8:11pm

Or refer the bsim manual and make your own changes..
Berkeley has a bsim manual website..
--
OR you could take your test die to a service provider and have them re-extract the models in the newer format..
but if youre going to do that, why not go to bsim4?