The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> RF Measurements >> Automation of Eye Aperture Ratio Measurement https://designers-guide.org/forum/YaBB.pl?num=1209812189 Message started by pancho_hideboo on May 3rd, 2008, 3:56am |
Title: Automation of Eye Aperture Ratio Measurement Post by pancho_hideboo on May 3rd, 2008, 3:56am In Eye Pattern, I have to evaluate following two aperture ratios. Time_Aperture =2*abs( indep(TBmax)-indep(TBmin) ) / ( abs( indep(TAmax)-indep(TAmin) )+abs( indep(TBmax)-indep(TBmin) ) ) Ampl_Aperture =2*abs(VBmax-VBmin) / ( abs(VAmax-VAmin)+abs(VBmax-VBmin) ) I do these tasks using Agilent ADS's Data Display with manually placed eight markers. But each time conditions are changed, I have to re-tune all markers placement. These tasks are fairly laborious. I can draw eye pattern using MATLAB and Cadence AWD other than Agilent ADS's Data Display. Could anyone share me methods for automation of this task using MATLAB ? Both "eyediagram()" and "commscope.eyediagram" in MATLAB Communications Toolbox are not useful for my purpose. The following is not useful for my purpose. http://eesof.tm.agilent.com/products/ads2005a_new_30.html Page-30 of http://eesof.tm.agilent.com/pdf/ads2005a_whats_new.pdf |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |