The Designer's Guide Community Forum https://designers-guide.org/forum/YaBB.pl Simulators >> Circuit Simulators >> Active inductor simulation https://designers-guide.org/forum/YaBB.pl?num=1231837826 Message started by noppp on Jan 13th, 2009, 1:10am

Title: Active inductor simulation Post by noppp on Jan 13th, 2009, 1:10am Hi all, I want to ask any one has a tutorial for Active Inductor Simulation using Cadence Spectre simulator. thanks  :)

Title: Re: Active inductor simulation Post by buddypoor on Jan 13th, 2009, 2:35am noppp wrote on Jan 13th, 2009, 1:10am: Hi all, I want to ask any one has a tutorial for Active Inductor Simulation using Cadence Spectre simulator. thanks  :) What are you mostly interested in ? Tutorial for active inductor replacement or simulation of the corresponding circuit ?

Title: Re: Active inductor simulation Post by noppp on Jan 13th, 2009, 5:39am Thanks for reply, Really, I just started studing Active Inductors cicuit and its applications. So, any tutorial will be helpfull for me. If you have any, please send me or upload. thanks in advance.

Title: Re: Active inductor simulation Post by buddypoor on Jan 13th, 2009, 7:20am noppp wrote on Jan 13th, 2009, 5:39am: I just started studing Active Inductors cicuit and its applications. So, any tutorial will be helpfull for me. At the moment, I have no tutorial (software) at hand, however, it should not be a problem for you to find some relevant articles/papers/tutorials via google, since active inductor design is one of the most favorite design method for active filters. Search for GIC (generalized impedance converter) or simply for "active inductor". The GIC requires two matched opamps. If lossy inductors are allowed you can use the NIC (neg. impedance converter) with only one opamp. If you have some specific questions regarding active inductor application, don´t hesitate to ask again - however, there is one thing you should keep in mind: With 2 opamps you only can simulate an active inductor which is grounded !!! Regards LvW

Title: Re: Active inductor simulation Post by oermens on Jan 13th, 2009, 12:21pm this book is useful: http://www.springer.com/engineering/circuits+&+systems/book/978-0-387-76477-1

The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved.