The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> High-Speed I/O Design >> DFE Adaption with 1/0 training pattern https://designers-guide.org/forum/YaBB.pl?num=1235967357 Message started by neoflash on Mar 1st, 2009, 8:15pm |
Title: DFE Adaption with 1/0 training pattern Post by neoflash on Mar 1st, 2009, 8:15pm I have got a question about DFE (decision feedback equalizer) adaption with a repetitive pattern such as 10. This recurssive pattern would make DFE has numerous combinations of stable status of coefficients of feedback taps. When real random bit pattern comes, the adaption has to restart again. Is there any way to solve this issue? Any published paper address this concern? |
Title: Re: DFE Adaption with 1/0 training pattern Post by sugar on Mar 1st, 2009, 11:23pm I think at training mode, the adaptation should not be enabled. During normal operation, say with random patterns, the adaptation loop should be very slow to average possible bad patterns like 1010 pattern. --River |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |