The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> Problems with simulating using technology library in ic5141
https://designers-guide.org/forum/YaBB.pl?num=1241943580

Message started by andrew_wee on May 10^th, 2009, 1:19am

Title: Problems with simulating using technology library in ic5141
Post by andrew_wee on May 10^th, 2009, 1:19am

Recently,i add a technology library to cadence.
i define the path of the library in the cds.lib and the cds.lib was located where i start icfb. Is there anything wrong with that way?
But when i use the device in the library to edit the schematic, then there is something wrong with simulating.
More over,i can't modify the model name of the device in the technology library. Anyway, i use the device in the analoglib,and then use the model in the technology library.
But i want to use the device of the technology library. How??? Please help me.

Title: Re: Problems with simulating using technology library in ic5141
Post by pancho_hideboo on May 12^th, 2009, 8:53pm

Your questions have no relation to "RF Simulator" at all.

andrew_wee wrote on May 10^th, 2009, 1:19am:

Recently,i add a technology library to cadence.
i define the path of the library in the cds.lib and the cds.lib was located where i start icfb.
Is there anything wrong with that way?

Correct.

andrew_wee wrote on May 10^th, 2009, 1:19am:

But when i use the device in the library to edit the schematic, then there is something wrong with simulating.

Describe your situations correctly and in detail.

andrew_wee wrote on May 10^th, 2009, 1:19am:

More over,i can't modify the model name of the device in the technology library.

Unless you describe your situations correctly and in detail, no one can answer.