The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Design >> Mixed-Signal Design >> HDL FILTER DESIGN WITH MATLAB https://designers-guide.org/forum/YaBB.pl?num=1254988956 Message started by silverit on Oct 8th, 2009, 1:02am |
Title: HDL FILTER DESIGN WITH MATLAB Post by silverit on Oct 8th, 2009, 1:02am Hi, I want create a lowpass FIR FILTER with the followin spec.: Fs=400MHz Fpass=55MHz Fstop=150MHz Apass=1 Astop=150 I have quantize the filter with 14bit in/out. I have a doubt regarding "Filter Internals" when select the "Rounding Mode" and "Overflow Mode". Is there a best setup for this parameter? Thanks |
Title: Re: HDL FILTER DESIGN WITH MATLAB Post by rampat on Nov 10th, 2009, 9:34pm Hi you need to compare how many adders and delay elements needed for each case,then you have to choose among them which gives you least Ramesh |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |