The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Other CAD Tools >> Entry Tools >> Nfet_rf layout in cmosp13
https://designers-guide.org/forum/YaBB.pl?num=1271785471

Message started by msmahani on Apr 20^th, 2010, 10:44am

Title: Nfet_rf layout in cmosp13
Post by msmahani on Apr 20^th, 2010, 10:44am

Has anyone any experience in drawing the layout for nfet_rf in cmosp13 technology?

My problem is when I add subc contact in schematic and layout, it doesn't pass LVS and asks the ring around the nfet to be connected to subc contact but if I do so, it doesn't pass LVS.

I am using subc contact in the same way it is used for nfet transistor for low frequency applications.

Thanks,
mo.

Title: Re: Nfet_rf layout in cmosp13
Post by tkhan on May 7^th, 2010, 6:18pm

msmahani wrote on Apr 20^th, 2010, 10:44am:

My problem is when I add subc contact in schematic and layout, it doesn't pass LVS and asks the ring around the nfet to be connected to subc contact but if I do so, it doesn't pass LVS.

thats because you aren't supposed to add a subc contact in schematic and layout.