The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> RF Simulators >> Interpretation of Minimal value in LSB-Noise of Crystal Oscillator
https://designers-guide.org/forum/YaBB.pl?num=1280323054

Message started by pancho_hideboo on Jul 28^th, 2010, 6:17am

Title: Interpretation of Minimal value in LSB-Noise of Crystal Oscillator
Post by pancho_hideboo on Jul 28^th, 2010, 6:17am

I simulated phase noises of simple crystal oscillator.

Here there is a minimal only in LSB-Noise.

Is this minimal value of LSB-Noise physically reasonable ?
If so, how should I interpret this minimal mechanism ?

Title: Re: Interpretation of Minimal value in LSB-Noise of Crystal Oscillator
Post by pancho_hideboo on Jul 28^th, 2010, 6:22am

I confirmed PM, AM, LSB and USB Noises using Agilent GoldenGate(HB), Agilent ADSsim(HB) and Cadence Spectre(Shooting-Newton).
They all give almost same results.