The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl Measurements >> Phase Noise and Jitter Measurements >> jitter comparisons https://designers-guide.org/forum/YaBB.pl?num=1280880707 Message started by uu@uk on Aug 3rd, 2010, 5:11pm |
Title: jitter comparisons Post by uu@uk on Aug 3rd, 2010, 5:11pm Hi All, I have a question about jitter comparison. For example, I got RMS edge to edge jitter number 20fs with clock period 1ns in one system while the same jitter 20fs with clock period 5ns in another system. I am thinking the jitter performance in the second system is better because it affects 5ns clock period less. Is that correct? Do people compare jitter normalized to the clock period? Thanks. |
Title: Re: jitter comparisons Post by love_analog on Aug 7th, 2010, 1:19pm yes, you are right. 20fs jitter will effect a 1ns system more than a 5ns system. your eye diagram in the former case will more closed. |
The Designer's Guide Community Forum » Powered by YaBB 2.2.2! YaBB © 2000-2008. All Rights Reserved. |