The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
Simulators >> Circuit Simulators >> Probe node voltage in one subckt
https://designers-guide.org/forum/YaBB.pl?num=1284599592

Message started by ywguo on Sep 15^th, 2010, 6:13pm

Title: Probe node voltage in one subckt
Post by ywguo on Sep 15^th, 2010, 6:13pm

Hi Guys,

How do I probe ALL node voltage in one specified subckt when I run simulation with spectre in ADE? I mean all nodes in an arbitrary specified subckt.

Thanks
Yawei

Title: Re: Probe node voltage in one subckt
Post by Andrew Beckett on Jan 2^nd, 2011, 9:29am

Hi Yawei,

There's an example of doing this in the "spectre -h save" :

save * subckt=inv

(where inv is the name of your subckt master). Note you have to do this via an include file (e.g. including a *.scs file using this syntax, via the Model Libraries form); there's no way of defining it directly in the ADE UI. Partly that's due to the challenges of translating wildcards between different namespaces, but hopefully we can resolve that one day!

Regards,

Andrew.