The Designer's Guide Community Forum

The Designer's Guide Community Forum
https://designers-guide.org/forum/YaBB.pl
General >> Opportunities >> Lead Developer, Reliability Analysis
https://designers-guide.org/forum/YaBB.pl?num=1298429269

Message started by latha on Feb 22^nd, 2011, 6:47pm

Title: Lead Developer, Reliability Analysis
Post by latha on Feb 22^nd, 2011, 6:47pm

Hi All,

we are looking for :Lead Developer, Reliability Analysis

 This position is expected to be highly experienced (8-10 years). The experience can be in one or more of the following three areas (in order of preference): (i) EDA methodology/flow development (ii) EDA vendor AE (iii) Digital design engineer. He/she should have expert working knowledge of the design flow and relevant EDA tools (Cadence expertise preferred) in the domain.
 Must understand the physics of reliability effects such as signal and power electromigration (EM), Gate Oxide Integrity (GOI) and Antenna.
 Should have worked on reliability analysis of production designs to enable good understanding of sound methodology and third party tools. Should have understanding of relevant silicon technology data that is typically needed to drive reliability analysis tools.
 Tools: Preferable to have work experience with Cadence tools, but experience with other tools too would be considered.
 Scripting and software languages: Perl / Tcl / C++

pls send ur cv's to hr@callidasoft.com

thanks